GP FLEX

Reinforced grass and protected roots

Tenax GP FLEX is a new generation plastic grid for reinforcing grass subject to pedestrian and vehicular traffic both permanently and temporarily.

It is obtained through coextrusion of two polymers: High Density Polyethylene (HDPE) to give structure to the product and Ethylene-Vinyl Acetate (EVA) to increase slip resistance of vehicles while improving their traction. The “oscillated” mesh structure provides a product which is extremely flat and flexible, as well as easy to install.

The product is completely inert, both chemically (humic acids and fertilizers) and biologically (microorganisms, bacteria).

Available also in a version suitable for walkway reinforcement.

*It can vary depending on the characteristics of the subgrade

• Reinforcement of grass surfaces subject to pedestrian and vehicle use or heavy traffic
• Green driveways
• Grass protection during fairs and concerts
• Garages and areas for garaging caravans
• Maintenance of grass surfaces of unpaved roads, courtyards and car parks

• Total chemical inertia
• High thickness and weight to ensure root protection
• The oscillated mesh and the EVA layer improve vehicle grip
• Versions available: GP FLEX 1800 and 1400

• It protects the turf
• It reduces the development of ruts
• Excellent aesthetic impact
• Quick installation, even on large surfaces
• Reusable

• Excavate the soil to a minimum depth of 30 cm
• Lay down a mixed granular terrain and procede compacting and levelling it up to 90%
• Spread 2 cm of soil on the surface
• Sow the lawn
• Unroll and fix the net to the ground with the appropriate U-shaped nails (possibly a few hours after laying and during the hottest hours of the day)
• Fill the net until it is completely covered
• Wet regularly and wait for at least the third cut  before passing over it