TR

The turf withstands vehicular traffic

High Density Polyethylene (HDPE) net with a diamond mesh.

Its structure ensures effective anchoring of the roots, thus efficiently protecting the grass from being pulled up.

Lightweight and extremely flexible, it is particularly suitable for protecting existing grassed surfaces or for reinforcement applications (including temporary ones).

*It can vary depending on the characteristics of the subgrade

• Reinforcement of surfaces (existing turf or areas to be grassed over) subject to light vehicle loads
• Reinforcement of green areas subject to heavy pedestrian traffic
• Temporary reinforcement on existing turf (fairs and concerts)
• Temporary car parks
• Anti-sinking net for golf driving zones

• Mesh: 35 x 33 mm
• It protects turf and roots
• Total chemical inertia
• Its wide mesh enables a better rootage

• It can be used on already green lawns
• Quick installation, even on large surfaces
• Excellent aesthetic impact
• Lightweight and inexpensive

1. Surfaces with existing grass:

• Cut the grass and level the surface if necessary
• Fill the ripples with a mixture of growing medium and sand
• Sow in correspondence of the fillings
• Proceed with the laying of the Tenax TR net, fixing it to the ground using the special U-shaped nails

2. For new installations

• Dig the substrate for about 30 cm
• Lay some granular mixture and compact it up to 90% of the Proctor curve
• To create the turf, sow the lawn or use the pre-seeded felt Tenax FVP
• Proceed with the laying of the Tenax TR net, fixing it to the ground using the special U-shaped nails