Made in Italy

MULTIMAT

Erosion control and revegetation

MULTIMAT

Erosion control and revegetation

DESCRIPTION
USE-ADVANTAGES
SIZE
INSTALLATION

Three-dimensional Polypropylene (PP) geomat

Three-dimensional geomat made by laying three extruded and bi-oriented Polypropylene grids one upon the other and stitching them with a black Polypropylene thread.

Available also in the MULTIMAT 100 version with vegetative felt (FVP) stitched inside it.

Features - Multimat 100

Weight
Thickness

Features - Multimat 100P

Weight
Thickness

Colours

Black

Applications

Protection and revegetation of slopes subject to surface erosion where there is a suitable vegetative base.

Features

High thickness and high tensile strength for a greater erosion control
Available also with pre-seeded felt (Multimat 100 P)

Advantages

Easy and quick to install

Trade information - Multimat 100

SIZE [m]	COLOUR	CODE	SELLING UNIT	SELLING UNITS/PALLET	EAN 13
2,20 x 30	Black	60790089	Roll	-	8002929010377

Trade information - Multimat 100P

SIZE [m]	COLOUR	CODE	SELLING UNIT	SELLING UNITS/PALLET	EAN 13
2,20 x 30	Black/Green	1A050268	Roll	-	8002929072764

1 - Preparing the site

Remove soil clods, roots, stones or vehicle imprints from the area. Any voids should be filled in order to obtain a smooth and compact surface that allows the MULTIMAT to fit flush against the ground.

2- Installation

Excavate the anchor trenches needed to securely fasten the MULTIMAT to the ground.

The trench must be at least 30 cm wide and 30 cm deep and it must be excavated at about 60 cm far from the edge of the slope.

3 - Installing the geomat

Anchor the MULTIMAT with U staples placed every 50 cm in the trench and unroll it along the slope by overlapping the rolls about 10 cm. Fasten the net along the slope with U staples placed every 100 cm.