BAHIA

Malla de Polietileno (PE), resistente y reforzada

Mallas tupidas de Polietileno (PE), resistentes e indesmallables, con borde reforzado. Extendida sobre el campo para la recogida de perdigones de plomo o en vertical para delimitar el perímetro del área de tiro, permiten la práctica de este deporte en total seguridad.

• En horizontal extendidas en el suelo para la recogida de los perdigones de plomo y de los platos
• En vertical para delimitar el perímetro del área de tiro

• Fabricada en Polietileno (PE)
• Malla tupida y resistente
• Borde reforzado
• Mantiene las características a lo largo del tiempo

• Ligera e indesmallable
• Segura y fácil de instalar

The Tenax Bahia net is ideal both laid on the ground to collect lead shot and clay target remains, and installed vertically to delimit the shooting area.

Horizontal installation

Installing the net horizontally and on the embankment at the end of the ground: cut the rolls to size; lay the fabric on the shooting ground overlapping the edges at least 20 cm; make sure they are well fixed to the ground with metal U staples to avoid that they are lifted from the wind.

Vertical installation

Vertical installation as barrier against pellets: install the support posts in the soil along the perimeter of the shooting area; place metal tension wires between the posts (maximum distance between the wires: 1 m). Then, unroll the fabric and fasten it to the posts and to the tension wires with plastic or metal ties.