Home Construction Synthetic turf and reinforced green surfaces Reinforced green surfaces GRAVEL LOCK
Made in Italy

GRAVEL LOCK

Composite for gravel containment, made of HDPE and PP, mesh size 35x33 mm, weight 1450 g/m²

TENAX GRAVEL LOCK consists of a HDPE grid with protruding points and a non-woven PP fabric heat-sealed to the bottom. The composite material can be used to create stable, draining gravel paving for pedestrian and vehicular traffic.

The final surface therefore has the same characteristics and performance as a road surface while maintaining the drainage capacity of the soil.

The non-woven fabric on the bottom also prevents soil and gravel from mixing over time under the effect of rainfall and traffic stress.

TENAX GRAVEL LOCK is a valid alternative to traditional gravel grids. It is easier and quicker to install as it comes in rolls and requires about 1/3 of the gravel for backfilling, ensuring an optimal aesthetic result.

Available colors
Features

Gravel diameter

Weight

Thickness

Applications

TENAX GRAVEL LOCK is ideal for creating stable, draining gravel paving for pedestrian and vehicular traffic.

  • Private and public parking areas
  • Paths and access areas
  • Bike paths
  • Hanging gardens and terraces

Features

  • Made of HDPE + polypropylene (PP) non-woven fabric
  • Weight: 1450 g/m²
  • Thickness: 12 mm
  • Draining
  • Excellent resistance to compression and atmospheric agents

Benefits

  • Quick and easy to install compared to traditional gratings
  • Excellent aesthetic effect upon completion of the work
  • No maintenance required
  • Requires less gravel than gratings (approximately 30 kg/m²)
  • Practical and safe
Code Dimensions (m) Color EAN code CONF/UDV UDV
1A180471 1.5 X 20 GREY 8002929127228 1 ROLL

TIP: Before proceeding with installation, we recommend leaving the product unrolled in the sun for a few minutes to allow it to lose its shape memory and become flatter.

1. Pedestrian streets

  • Create a compact, well-drained base layer approximately 10 cm thick.
  • Compact and level the base surface
  • Proceed with laying GRAVEL LOCK, using flat-head nails to secure it to the ground.
  • Fill the mesh with gravel (Ø 2/6 mm) and compact manually (vibrating plate or hard bristle brush).

2. Parking lots and driveways

  • Prepare the existing surface by weeding and compacting the area.
  • Spread a layer of medium-sized gravel approximately 5 cm thick.
  • Compact and level the surface obtained
  • Proceed with laying GRAVEL LOCK, using flat-head nails to secure it to the ground.
  • Fill the mesh with gravel (Ø 2/6 mm) and compact manually (vibrating plate or hard bristle brush).