Made in Italy
MULTIMAT
Erosion control and revegetation
Colours
DESCRIPTION
Three-dimensional Polypropylene (PP) geomat
Three-dimensional geomat made by laying three extruded and bi-oriented Polypropylene grids one upon the other and stitching them with a black Polypropylene thread.
Available also in the MULTIMAT 100 version with vegetative felt (FVP) stitched inside it.
Features - Multimat 100
Weight
Thickness
Features - Multimat 100P
Weight
Thickness
USE-ADVANTAGES
Applications
- Protection and revegetation of slopes subject to surface erosion where there is a suitable vegetative base.
Features
- High thickness and high tensile strength for a greater erosion control
- Available also with pre-seeded felt (Multimat 100 P)
Advantages
- Easy and quick to install
SIZE
Trade information - Multimat 100
Trade information - Multimat 100P
INSTALLATION
1 - Preparing the site
Remove soil clods, roots, stones or vehicle imprints from the area. Any voids should be filled in order to obtain a smooth and compact surface that allows the MULTIMAT to fit flush against the ground.
2- Installation
Excavate the anchor trenches needed to securely fasten the MULTIMAT to the ground.
The trench must be at least 30 cm wide and 30 cm deep and it must be excavated at about 60 cm far from the edge of the slope.
3 - Installing the geomat
Anchor the MULTIMAT with U staples placed every 50 cm in the trench and unroll it along the slope by overlapping the rolls about 10 cm. Fasten the net along the slope with U staples placed every 100 cm.
4 - Filling
Infill the net.
