Define the number of poles to use
considering a pole approximately every 2 m
and arrows on the corners.
Position the pickets along the perimeter
and hang a guide wire to use to position the
poles perfectly aligned.
Position the TENAX EXTRA
ARROWS at the corners for a greater stability and strength.
fence by pulling the metal, plastic coated
TENAX EXTRA WIRE through the holes of each
stake (every 50 cm high) and fasten the relevant TENAX WIRE
TENSIONERS, at approximately 15 cm from the pole and
corresponding to each wire positioned.
Installing the mesh.
Unroll the mesh along the poles positioned
and fasten the mesh to the wires and the
relevant poles with the help of the metal,
plastic coated TENAX EXTRA WIRE or the
specific plastic TIES.