Flat nets for the separation of mechanical parts

Industry

HOME PAGE

Reinforcement - Protection

flat net for the separation of mechnical parts

Flat net for separation

Product

Thickness
(mm)

Roll measure
(m)

Material

Colour

CN 40

0,75

0,76x50

black

CN 7

1,00

0,80x50

black

CN 2

1,40

1,00x50

black

RKS

3,5

1,50x20

black

CE 403

1,00x20

black

Flat polyethylene nets for the separation and protection of manufactured and semi finished mechanical products against collision and damage due to contact.
They allow items and mechanical parts to be layered even if not perfectly dry, because they avoid the formation of condensate on the surface.

Advantages
•	Guaranteed protection of the painted or treated parts
•	High resistance against oil and grease aggression
•	Condensate dissipation
•	Wide range of thicknesses, available upon request
•	Reasonable costs
•	Reusable
•	Fully recyclable

TENAX Flat Nets, available in five models, represent a good alternative in comparison to common spacers:

• TENAX CN 40: Thick mesh for increased coverage surface, economical;
• TENAX CN 7: Light square mesh, easy to handle and soft, the most popular;
• TENAX CN 2: Square mesh, very strong, reusable several times;
• TENAX RKS: Square mesh with high resistance against compression;
• TENAX CE 403: Rhomboidal net, draining partition with high supportive capacity.

The fact that the nets can be used several times reduces the production of rejects and decreases costs.

mesh CN 40	mesh CN 7	mesh CN 2	mesh RKS	mesh CE 403

Flat nets, not included in the list of standard nets, are available for special applications. We can produce nets with special features upon request – thickness, measurements, etc.