Logo TENAX
View the Site Map of TENAX Worldwide web siteSearch the TENAX web site
TENAX local web sites TENAX Worldwide web site
Geosynthetics
HOME PAGE   PRODUCTS CASE HISTORIES ASSISTANCE EMAIL
case history
Embankments construction of reinforced soil with TENAX TT mono-oriented geogrids and control erosion protection with TENAX MULTIMAT 100 geomats at the Marine installation of Huatulco, Oaxaca in Mexico
 
PRODUCT   TENAX TT 060 SAMP
TENAX TT 090 SAMP
TENAX TT 120 SAMP
TENAX TT 160 SAMP
TENAX MULTIMAT 100
LOCATION   Huatulco Oaxaca (Mexico) 1999
OWNER   Marine Ministery of Mexico
PROJECT   Marine Ministery of Mexico
CONTRACTOR   Gutiérrez de Velasco SA de CV


Problem
In the Development Program of the tourist destiny of Huatulco, Oaxaca in Mexico, the construction of an Army and Marine installation was considered, offering with it National Security to the area.
Since land has a high importance and value in this tourist zone, the property assigned to the Army and the Marine was placed in an irregular topographic site, with a low potential to be to be operated and with little tourist attraction. In the case of the Marine's space, which was situated in a cliff with a very difficult access that required to be levelled, cuts sections and fills were needed.

solution
The original solution to the problem of the embankment, consisted in the construction of conventional retaining walls. The disadvantage of this solution was the ecological impact of the construction, considering that it was situated in a tourist area, and that the final aspect of the slopes and walls was disagreeable for the place.
The alternative to the retaining walls, was the construction of slopes reinforced with TENAX TT mono oriented geogrids. The installation of MULTIMAT 100 geomats, permitted the development of vegetation as an erosion control protection at the faces of the embankments and cuts which in some cases were almost vertical.
The three reinforced slopes, with heights of 4, 6 and 13 meters, and inclined average angle of 80º, had a length of a 20, 100 and 100 meters. The total area protected against the erosion was 7,260 square meters of slopes.

conclusions
Thanks to the use of TENAX Geosynthetics in the solution for the cuts and embankments, the following benefits were obtained:

  • Ecological solution
  • Better aspect of the construction
  • Lower impact for a tourist development
  • Lower costs
  • Fast construction compared with standard solutions

 

 

Embankments construction of reinforced soil with TENAX TT mono-oriented geogrids and control erosion protection


Embankments construction of reinforced soil with TENAX TT mono-oriented geogrids and control erosion protection


Embankments construction of reinforced soil with TENAX TT mono-oriented geogrids and control erosion protection


Embankments construction of reinforced soil with TENAX TT mono-oriented geogrids and control erosion protection

PRODUCTS
TENAX TT SAMP
TENAX MULTIMAT
 
APPLICATIONS
Reinforcement:
Construction of retaining walls
Erosion control:
Slopes with vegetative matrix
TENAX International B.V. • Geosynthetics Division
Via Ferruccio Pelli, 14 CH-6900 Lugano, Switzerland • Tel +41+91.9242485 • Fax +41+91.9242489

geo@tenax.net

TENAX SpA - Geosynthetics Technical Office (GTO)
Viale Monza, 1- 20125 Milano (MI), Italy • Tel. +39 02.26113532 • Fax +39 02.28971107

gto@tenax.net

TENAX SpA • Divisione Geosintetici
Via dell'Industria, 3 • I-23897 Viganò (LC), Italia • Tel +39 039.9219307 • Fax +39 039.9219200

geo@tenax.net

© TENAX Group all rights reserved