Resistant and flexible fence for aviaries and cages
Escape of birds and intrusion of other animals in zones dedicated to birds are the main problems regarding the protection of small animals.
The CINTOFLEX M heavy-duty plastic mesh is light and flexible. It is ideal for creating aviaries and cages for birds, protecting them from the intrusion of other animals.
The exclusive production process of its threads offers the PET CINTOFLEX M fence the highest tensile strength and makes it long lasting over time. Its light threads make it an inexpensive solution.
The PET CINTOFLEX M fence offers many advantages in comparison with wire meshes: it is easy to install, light to handle and it resists any weather condition. Therefore, it is ideal for permanent fencing.
- It is ideal for creating aviaries for small birds and parrots
- It prevents the intrusion of other animals
- It is mainly used to build chicken runs
- Suitable also for fencing areas where lightness is needed
- Produced from polypropylene
- Mesh: 18×25 mm
- The mesh undergoes a special process of molecular orientation of the threads in both directions
- Approved by dog trainers: the entire pet&garden range was evaluated and approved by professional dog trainers
- Non-toxic it does not harm animals
- Light, flexible and heavy-duty
- UV treated
- It does not fade
- It can be used horizontally to close aviaries and cages
- Flexible, resistant and non-deformable
- It keeps colour and features unaltered over time
- It resists bird excretions and saline corrosion
- Easy to install
|SIZE [m]||COLOUR||CODE||PACKS/SELLING UNIT||SELLING UNIT||SELLING UNIT/PALLET||EAN 14|
1. Outline the area to fence
Place the posts at the perimeter corners. Then place the external posts along the imaginary perimeter line about 40 cm from the corner point and stretch a guide wire. The external posts help to make the position of the corner post visible, even after it has been removed.
2. Mark the position of the posts
Remove the corner posts and mark the points where holes will be dug for EXTRA T POSTs and EXTRA ARROW bracing posts using chalk.
3. Installing metal posts
Place the posts along the perimeter about 2 meters from each other. The posts can be positioned in cement or directly in the ground.
3a. Installing posts in cement
Make holes in the ground, with a shovel or machinery such as drills or mini-excavators, approximately 20-30 cm deep for a width of 20-30 cm; pour cement in the hole and position the posts until you touch the bottom, checking they are perfectly perpendicular to the ground and aligned with the previously hung twine. Wait until the cement is completely dry before installing the fence, to avoid misaligning the posts when installing the mesh.
3b. Installing posts in the ground
Make holes in the ground that are approximately 50 cm deep. Place the posts in the ground, cover with the dug earth and compact.
4. Installing plastic coated metal wires
Strengthen the fence by pulling the plastic coated TENAX EXTRA WIRE through the holes of each post and fasten them to the relevant TENAX WIRE TENSIONERS. Leave the central wire free to move to allow it to match up with the mesh pitch when fastening. For each wire, position the wire tensioners between the posts. Pass each wire in the specific wire tensioner mechanism. With the help of pincers or a wrench, tighten the plastic coated wires.
5. Installing the mesh
Unroll the mesh along the posts. Start by unrolling the whole mesh and fasten it temporarily to the posts.
6. Fastening the mesh
Fasten the mesh to the wires and relative posts with the help of the plastic coated TENAX EXTRA WIRE or the specific FIX-TIE plastic ties. Pull and finish installing the mesh, checking that it is aligned with the posts and the wires are tensioned.
Plastic fences for building a chicken coop
Place the TENAX EXTRA T POSTs along the perimeter of the chicken coop. Strengthen the fence by pulling the metal wire through the holes of each post. Unroll the plastic TENAX CINTOFLEX mesh along the posts and fasten it with metal wire or TENAX ties. The mesh can be fastened with TENAX staples on wood structures. It is advisable to close the top of the chicken coop covering it with the plastic TENAX AVIARY mesh to prevent intrusion of other birds or farmed birds escaping.