Mechanical protection for underground pipelines TENAX CE

net for underground pipes protection

Data sheet TENAX CE 400

Data sheet TENAX CE/T

TENAX CE

Protection even under the ground
The TENAX CE product range has been especially conceived for the protection of all types of underground pipelines and is therefore resistant to chemical and biological agents commonly present in the ground.
This allows their protective properties to remain unaltered throughout the life-span of the installation.

BENEFITS
	High resistance to compression, tearing and wearing
	Light, flexible and easy to install
	Maximum protection
	Adaptable to all pipeline sizes
	Complete chemical and biological inertia
	During storage and transport
	Reduce damages in storage of pipelines piles highly
	Protect pipelines during loading, transport and unloading on working site
	During installation
	Installation is simple and quick
	Restrict damages caused by friction between pipelines and excavation walls
	Absorb the impact of the material used to fill up
	Protect pipelines from rocks on the excavation bottom and on the walls
	Avoid the use of sand layer
	Once installed
	Reduce the damages caused by local ground settling and by effects of thermal variations
	Fine ground particles, by matching with the net, make a compact surface to protect the pipelines
	Protect pipelines from any possible damage caused by future excavation

net for underground pipes protection

Product	size m	mesh mm	weight g/m2	colour	EAN bar code	rolls per pallet	sales unit
TENAX CE
CE 400	1,50 x 20	6,5 x 6	1200	black	8002929014559	8	roll
CE 402	1,20 x 20	6,5 x 6	1200	black	8002929014511	8	roll
CE 403	1,00 x 20	6,5 x 6	1200	black	8002929014498	16	roll
CE 408	0,60 x 20	6,5 x 6	1200	black	8002929014504	24	roll
CE 405	0,50 x 20	6,5 x 6	1200	black	8002929014467	32	roll
CE 406	0,40 x 20	6,5 x 6	1200	black	8002929014450	40	roll
TENAX CE/T
CE/T	1,00 x 20	4 x 10	1800	black	8002929016676	6	roll
CE/T	0,75 x 20	4 x 10	1800	black	8002929061003	12	roll
CE/T	0,60 x 20	4 x 10	1800	black	8002929046710	18	roll
CE/T	0,40 x 20	4 x 10	1800	black	8002929060990	30	roll

INSTALLATION

For pipes with a circumference of less than 15 cm in relation to the height of the net:

net for underground pipes protection

Lay and unroll the mesh parallel to the pipe which is to be protected.
Place the net beneath the pipe.
Wrap the pipe with the net, overlapping the edges by around 15 cm.
Fix the net with plastic bands or by heating.

For pipes with a large circumference:
net for underground pipes protection
Cut the net into pieces of more than 15 cm of the circumference of the pipe.
Wrap the pipe with the net overlapping the previously installed net by around 15 cm.
Fix the net with plastic bands or by heating.

As "capping":

Unroll the net parallel to the already buried pipe to be protected.
Lay the net onto the pipe so as it covers about the upper half of its circumference.
Proceed with burying the now protected pipe.